v6 motor !!

its been a while and i wanted to hear her again :p

http://media.putfile.com/38l-beast-Startup 1st attempted Start!

http://media.putfile.com/OMG-v6-beast

https://www.youtube.com/watch?v=854cZYS58pE (20PSI )

https://www.youtube.com/watch?v=AXO062yjkLc (exhaust finally on)

https://www.youtube.com/watch?v=IhZBReba2xM (BOV music to my ears lol )

New setup will be 72MM TURBO, possibly larger CAM, new custom intake, and im lookin at beautiful CNC heads :*woohoo*: still hopin for 550 at the wheels

dude that's bad ass!

thx bro

dude that's amazing.... when's it all gonna be done... and when's the dyno?

Spring i hope

awesome man.... what else do you have left to do?

lol umm buy the intake/heads/60lb injectors. weld all of the hot and cold side pipes, install the intercooler

murph let me know if you need any help or tools and i can try to help out sometime. I havent messed with turbos before but it would be fun

anytime brother i think we still need a band saw to cut the pipes but bobby and i are going to do the welding.. im gonna do some work this weekend if anyone wants to come over! im out for the night guys! give me a call if ur free 317-509-8620

wish i could this weekend, but i'm working 36 hours from friday to sunday. Unfortunately i dont have a band saw though lol

How much boost do you plan on running to get to the 550 mark?

think I seen where he was running 20 psi on one of the youtube videos... not for sure though

should hit that mark running around 14-17psi if the motor is flowing really well

well I was close lol... That's awesome though. Sixxers can do it!

joparrett wrote:well I was close lol... That's awesome though. Sixxers can do it!

In the vid above i did hit 20psi for a quick sec, it was a slow 4th gear pull and was def fun!

Murph wrote:anytime brother i think we still need a band saw to cut the pipes but bobby and i are going to do the welding.. im gonna do some work this weekend if anyone wants to come over! im out for the night guys! give me a call if ur free 317-509-8620

I may have a hook up on the band saw!!!

Give me a call and we'll talk about it.

AJ

I have a grinder and lots of discs for it if you need an extra to smooth out your welds. I also have a dremel if you need to be really accurate with anything. Just let me know on here or call me 812-236-7977.

mmmmh v-6 power!!!!

JStang314 wrote:I have a grinder and lots of discs for it if you need an extra to smooth out your welds. I also have a dremel if you need to be really accurate with anything. Just let me know on here or call me 812-236-7977.

you wanna offer then hell ya bro, we are working on it over the winter id love to use the grinder

First off .... that is amazing leave the exhaust off .. just kidding but i cant wait till spring when i can go see that beast. good luck finishing it.

Murph wrote:

JStang314 wrote:I have a grinder and lots of discs for it if you need an extra to smooth out your welds. I also have a dremel if you need to be really accurate with anything. Just let me know on here or call me 812-236-7977.

you wanna offer then hell ya bro, we are working on it over the winter id love to use the grinder

Not a problem man just let me know when you need it. That and I'll need something to do this winter to get me out of the house every once in a while so it sounds like fun to me

Souds Bad ass bro..

blakehunter316 wrote:First off .... that is amazing leave the exhaust off .. just kidding but i cant wait till spring when i can go see that beast. good luck finishing it.

well lol the exhaust will consist of 3.5" pipe into a 3.5" flowmaster outlaw muffler (straight pipe as well) lol so it should sound similer :^drunk^:

Are you looking at porting the stock heads or getting aftermarket heads?

still looking at getting CNC heads with stock valves they flow really great..

I just purchased 60# injectors and some used head studs today!! Saved about 345 bucks