Havin idle problems
4 posters
Havin idle problems
The car was idling rough so i replaced the IAC. MAF is clean but the gasket from the throttle body to the intake fell apart. I have ordered a new one. The car still idles funny could it be because of the gasket. I will put the new one on when i get it. Should i replace the TPS. Also when I shift the RPMS dont come down the kinda stay at whatever RPM I shifted at. I am pulling my hair out right now trying to figure this out. HELP
KenScrib- hitch hiker
- Number of posts : 21
Age : 43
My Ride/Rides: : 94 GT 5.0
Mods: : Cold air intake
lowered
BBK long tubes
BBK off road H pipe
Flowmaster exhaust
4:10 gears
FR 500 wheels
Re: Havin idle problems
Mine does the same thing during shifting and started as soon as I put the tune in mine. I don't have any advice but when you figure it out let me know so I can fix mine!
scstanger- Admin
- Number of posts : 1175
Age : 45
Humor : In every situation!
My Name: : Richard
My Ride/Rides: : 2000 Roush Stage 1
Mods: : Roush CAI, BBK 70mm TB with Trickflow Aluminum Intake manifold and plenum, Magnaflow X and shorty mufflers, SCT Tune, 8000k HID Headlights and FOGS
Re: Havin idle problems
Man that sucks. I dont have advice either but I bet someone on moddedmustangs.com will have an answer for both of you guys.
jpac811- Small Block 289
- Number of posts : 144
Age : 35
Humor : anything funny
My Name: : Jon
My Ride/Rides: : 2007 Ford Mustang GT Premium, Alloy
Mods: : 464WHP/438FT-LBS Whipple Supercharger, 3.5in Pulley, BBR 93oct dyno tuned w/SCT Xcal2, BBK long tubes, BBK o/r X, Borla cat back exhaust, Exedy Mach 500, Eibach Pro Kit, BBR LCAs, BBR Adj. Pan Hard Bar, 4300k HIDs, LED map lights/ turn signals/ side markers/ rear side markers/ reverse lights/ license plate light, Plasti dipped Pony/GT emblems, VHT'd front turn signals, rear side markers, tail lights, third brake light
Vids of both my rides:
https://www.youtube.com/user/jpac811
Re: Havin idle problems
Been having the same issue. Today was especially bad. I haven't been able to investigate it too much, but I have been told it's related to the condition of the throw out barring of the clutch. It doesn't make much sense to me.
mustangmallory- Moderator
- Number of posts : 246
Age : 45
Humor : I find humor in everything!
My Name: : Ridge
My Ride/Rides: : 2006 Mustang GT
Mods: : Mallory is more about looks than speed right now. I'm trying to keep it clean and classy, while bringing out the natural aggression of our beloved stangs.
CDC Aggressive chin spoiler
Golden Eye 6k HID headlights and foglights
Shelby Cobra Super Snake stripe
20% Windown film from Palmetto Pro Tint
H&R Super Sport lowering springs
KMC Nova series wheels with Nitto NT550 tires (staggered fit)
OEM 1966 "GT" fender badges...yes they are over 50 years old
UPR Products Pistol grip shifter
Dash has been blacked out
Pioneer f700 headunit
Roush hood scoop
Saleen headlight splitters
Clear front corner marker lights
Cherry Bomb mufflers
Re: Havin idle problems
That makes perfect sense to me because mine is squeaking and needs to be replaced! I had to buy new kitchen appliances or it would already be done. Happy wife happy life right! Anyway maybe we can plan a clutch/bearing install soon! That is, of course, if the rain ever stops!
scstanger- Admin
- Number of posts : 1175
Age : 45
Humor : In every situation!
My Name: : Richard
My Ride/Rides: : 2000 Roush Stage 1
Mods: : Roush CAI, BBK 70mm TB with Trickflow Aluminum Intake manifold and plenum, Magnaflow X and shorty mufflers, SCT Tune, 8000k HID Headlights and FOGS
Re: Havin idle problems
okay think I got the idle fixed, but know when I go to shift my rpms dont drop the stay up for a few secs then slowly go down. what the heck I cant win. I fix one thing then something else breaks LOL. any ideas?
KenScrib- hitch hiker
- Number of posts : 21
Age : 43
My Ride/Rides: : 94 GT 5.0
Mods: : Cold air intake
lowered
BBK long tubes
BBK off road H pipe
Flowmaster exhaust
4:10 gears
FR 500 wheels
Similar topics
» EGR Tube Problems
» Is anyone still having problems with the site out there?
» Unilugs, any problems using those?
» Problems with adding lowering springs???
» My "new" 86 mustang gt hatchback problems...viewers beware
» Is anyone still having problems with the site out there?
» Unilugs, any problems using those?
» Problems with adding lowering springs???
» My "new" 86 mustang gt hatchback problems...viewers beware
Permissions in this forum:
You cannot reply to topics in this forum
|
|