gt emblem
3 posters
Page 1 of 1
gt emblem
any 1 ever remove the gt emblem from a 07 ...... if so does it have any posts comming off of it into the fender like my 02 did or is it all 3m?
Guest- Guest
Re: gt emblem
Yes . If I remember correctly there is 2 speed nuts holding the emblem on. Its been awhile since I had my fender off thou...
GreyGhost- Moderator
- Number of posts : 898
Re: gt emblem
geauxblack wrote:do you recal if they are : or .. ? rough drawing but it works
OK! The things I go thru for this club... (that I love by the way). I just went out and pulled my wheel and inner fender, It's held on by double sided tape with 2 alighnment pins in the up and down position. 1 on the lower part of the G and the other rite above in between the G and the T. I hope this helps ( : )
GreyGhost- Moderator
- Number of posts : 898
Re: gt emblem
GreyGhost wrote:geauxblack wrote:do you recal if they are : or .. ? rough drawing but it works
OK! The things I go thru for this club... (that I love by the way). I just went out and pulled my wheel and inner fender, It's held on by double sided tape with 2 alighnment pins in the up and down position. 1 on the lower part of the G and the other rite above in between the G and the T. I hope this helps ( : )
Lets be honest, you probably had it apart anyway doin something... LOL
Shady- Admin
- Number of posts : 1366
Age : 40
Humor : When you own a ford you don't need a good wrench!
My Name: : Rick AKA "Shady"
My Ride/Rides: : 1997, Mustang GT, Black
Mods: : Lambo doors, 6" cowl hood, Alpine touchscreen in-dash DVD player, Nytrex Triple Threat Nitrous System, BBK off-road X pipe, Flowmaster exhaust, Halo Headlights, 20" KMC Floss Wheels, and a cute passenger seat cover...
Re: gt emblem
No... honestly, I only went out to look. I didn't remember what it was held on by. And only to help another member (and to kill my couriosity) I just had to look and see for myself. It had been a while since that deer hit me.
GreyGhost- Moderator
- Number of posts : 898
Re: gt emblem
Thay might all be the same. 3m tape and 2 small holes.
Hell i would just take one side off to look and see . if there is small holes you can allways put it back on with some 3m tape
Hell i would just take one side off to look and see . if there is small holes you can allways put it back on with some 3m tape
Re: gt emblem
what would be the easiest method of removal of said 3m tape ? any suggestions? ive heard fishing line what say you
Guest- Guest
Re: gt emblem
Heat it up slowly, with a hair dryer/heat gun to get the tape soft. Then you can carfully use a plastic scraper or fishing line to get behind it to cut/pull it off. then you can get some adhesive remover to take the rest of the tape off.
GreyGhost- Moderator
- Number of posts : 898
Page 1 of 1
Permissions in this forum:
You cannot reply to topics in this forum