Newby: cnews85

Hello everyone, I'm in Eaton Rapids, MI area. I'm still trying to figure how to post pics and get my avatar set up, so bear with me. My toy is a 91 Coupe that will never be done, It's a strip and street toy. I probably only put 200 milres on the od this past summer. No one to cruise with. I have many parts to insatll this spring that I didn't get to last year. There are way too many mods to list but here are a few.
68 block .030 over w/main support 306ci 11:1 comp
fully balanced rotating assem
Stage 3 rods ARP wave lock bolts
Canton 7 qrt oil pan
Windsor Jr. heads fully ported and flowed
1.70 Rollers 7/16th studs
Soild Lifter Cam .565 lift on the big side
all Crane valve train
Vitor Jr. intake
Holley 750 mech. Race Carb
all MSD ignition
Holley elec. fuel pump
QA1 K Member
PA tubular control arms
Lakewood 90/10 struts
33 spline Strange axles w/spool
C-Clip Eliminators
4.56 gears
World Class Cobra T-5 trans (probably the next thing to BREAK)
There's a lot I'm missing just ask.
I also have a 91 Ranger with probably just as strong of a 302 with quite a parts list.
I will post pics as soon as I learn how any help is more than welcome. Hope to be crusing ASAP!!
:^drunk^:

Welcome to the family and good luck posting pictures. I posted some last night and it took me over an hour to figure it out.

Welcome Aboard!!!

welcome to the funhouse!!

Welcome.... got alot of mods!!! If you go to WWW.photobucket.com you can upload pictures and it will give you a code to post in the message box!!

I have my pics on photobucket but after I uploaed them I'm not sure where they went? I also got the pics were too big, not sure what size they need to be? I will get this figured out eventually!
I hope! :*bonk(:

If you click on your pic... there should be an area above the pic that says resize.... and resize it to Messege board size!!

I made a video to help show you how... I am just waiting for youtube to upload it so I can post it!!

Welcome to the Party

https://www.youtube.com/watch?v=E4gOnYY4a3A

there... watch that... I hope it helps you!!

[img:9191]http://i715.photobucket.com/albums/ww160/cnews85/dscn0057.jpg[/img:9191] :*drive*:

How do I set up my avatar?
Thanks

Very nice! I love the 4 eye swap

Post up a larger picture of your car and I'll make you one.

You want an Avatar or a signature?

Hello Clyde, glad to see you made it on here! I hope my wife gave you any info I may have forgot, work was kinda crazy. We are going to Grand Rapids for the auto show on Feb. 7th if you want to go with us, the more the merrier.

oh yeah love the 4 eyed foxes nice car and welcome to the club

Welcome to the insanity! BTW, love the 4 eye beast you got going.

Both would be nice.
Thanks

jus like i showed you with the pic for the forum.... resize what pic you want to small or tiny... and see if it fits!!! As far as sig.... ask mike (sexynerd) or dan (danstang) they can make you one!!

Nice car! What does in run in the 1/4?

Last year wasn't good, first time out my fuel pressure was giving me a false reading. It read 7psi when it was actually 16psi and the best I could do running like crap was 13.21 @ 105.6 on bfg radials. No thay were not drag radials like I run on the street now. The next time out I broke an axle on the line. I dropped the clutch at 6800rpm, a loud bang and that was it. I didn't move an inch. I bought whole new set up with 4.56 gears instead of 4.10's but never got back to the track again. I have most of my bugs worked out now and plan on spending as much time as possible at the track this year. I am hoping for an 11 sec time slip, if not I will change a few things to say the least.

lol!!! I know where you can get a 429 for $800