Is anyone interested?

View previous topic View next topic Go down

Is anyone interested?

Post by scstanger on Wed Mar 30, 2011 9:33 am

I've been in touch with someone about custom grill emblems for our club members and just thought that I would see if anyone is interested as they will be expensive. The guy that makes these says that the first one is $340 and all others will be $110. I know they're expensive and I wasn't going to post this but I thought that maybe a few would be interested so here they are.



The first one cost more because of the fabrication cost so if there are quite a few people we will figure out the total cost and split it between everyone and all pay the same amount. No hard feelings if no one wants one just thought that I would throw it out there. These are chrome and high quality products with the bracket. The dimensions are 2.48" x 2.83" and will be in the same location as the stock mustang emblem. These are for 94-04 models right now. If there is a high demand for them I can work on getting them for the S197 models but I'm pretty sure the price is going to be an issue. Let me know.


_________________
avatar
scstanger
Admin

Male Number of posts : 1175
Age : 38
Humor : In every situation!
My Name: : Richard
My Ride/Rides: : 2000 Roush Stage 1
Mods: : Roush CAI, BBK 70mm TB with Trickflow Aluminum Intake manifold and plenum, Magnaflow X and shorty mufflers, SCT Tune, 8000k HID Headlights and FOGS



View user profile

Back to top Go down

Re: Is anyone interested?

Post by scstanger on Wed Mar 30, 2011 11:45 am

UPDATE:
I spoke with Thomas about making the emblems without the bracket and what the price would be. Here is the response:

Hi Richard,


Here is a breakdown for you of my costs for the emblems without the bracket.


The plating of each one is $15.00
The casting is $15.00 each


I need $25.00 for each one to offset the cost of making of the master, removing the flash from the castings, getting the 2-way tape laser cut and applying the vinyl plus the costs of the tape and vinyl.


The price for one horse emblem at a minimum order of 12 is $55.00 Canadian.

I've been involved with three group buys before and the last one worked the best. I dealt with one person that collected the down payments and sent them to me in one lump sum and then I sent all the finished emblems to him and he sent them out to the individual buyers and I think he added a small markup for himself. Postage is a lot cheaper within the USA so it didn't make any sense to ship them individually from Canada.


Postage foe all the emblems is $35.00 for express post plus $1.35 per $100.00 insurance, I usually insure for about 1/2 the total value. Expedited post is slower and costs about $25.00 plus insurance.



Let me know if you would rather go this route.

_________________
avatar
scstanger
Admin

Male Number of posts : 1175
Age : 38
Humor : In every situation!
My Name: : Richard
My Ride/Rides: : 2000 Roush Stage 1
Mods: : Roush CAI, BBK 70mm TB with Trickflow Aluminum Intake manifold and plenum, Magnaflow X and shorty mufflers, SCT Tune, 8000k HID Headlights and FOGS



View user profile

Back to top Go down

Re: Is anyone interested?

Post by BraMas on Wed Mar 30, 2011 1:35 pm

Very cool! but not my cup of tea. It would look awesome in the garage
Keep in mind this is coming from someone that refuses to put WH stickers on my car Smile

_________________
Let me know if you want parts Powder Coated
avatar
BraMas
Admin

Male Number of posts : 1533
Age : 94
My Name: : Tim

View user profile

Back to top Go down

Re: Is anyone interested?

Post by scstanger on Wed Mar 30, 2011 4:04 pm

I thought that they would look good in place of the fender emblems or as an addition to the rear somewhere. The garage would also be cool!

_________________
avatar
scstanger
Admin

Male Number of posts : 1175
Age : 38
Humor : In every situation!
My Name: : Richard
My Ride/Rides: : 2000 Roush Stage 1
Mods: : Roush CAI, BBK 70mm TB with Trickflow Aluminum Intake manifold and plenum, Magnaflow X and shorty mufflers, SCT Tune, 8000k HID Headlights and FOGS



View user profile

Back to top Go down

Re: Is anyone interested?

Post by BraMas on Wed Mar 30, 2011 5:27 pm

Oh for some reason I thought they where to replace the running pony in the grill.
The trunk might actually look cool. But it is going to be hard to get people to spend that amount of cash on a decal. But it is still pretty cool

_________________
Let me know if you want parts Powder Coated
avatar
BraMas
Admin

Male Number of posts : 1533
Age : 94
My Name: : Tim

View user profile

Back to top Go down

Re: Is anyone interested?

Post by scstanger on Wed Mar 30, 2011 6:45 pm

Yeah the $110 ones are for the grill, the cheaper ones are for anywhere else as they don't come with the bracket to replace the grill emblem. Either way they're really expensive and probably wont happen but I may break down and get one for myself. We'll see.

_________________
avatar
scstanger
Admin

Male Number of posts : 1175
Age : 38
Humor : In every situation!
My Name: : Richard
My Ride/Rides: : 2000 Roush Stage 1
Mods: : Roush CAI, BBK 70mm TB with Trickflow Aluminum Intake manifold and plenum, Magnaflow X and shorty mufflers, SCT Tune, 8000k HID Headlights and FOGS



View user profile

Back to top Go down

Re: Is anyone interested?

Post by FRCE_FED on Thu Mar 31, 2011 12:06 am

good lookin out richard to expand the wildhorses. I may have to think about this

_________________



UNDER CONSTRUCTION
Built 3.8l/ lightly ported upper and lower/ stock heads/ modified MAC shorty headers/ 62mm single turbo/ little cam/ 60lb injectors/ twin GT pumps w- dual fpdm/ TKO500 trans/ HPX Slot MAF/ Street tires- 315/35/17 Nitto 555R's/ Fox 8.8 rear w- 3.73's. Looking for 550rwhp at 15-20psi
avatar
FRCE_FED
Admin

Male Number of posts : 2450
Age : 31
Humor : spendin money that I don't have to buy parts that I don't need to impress people that I don't know
My Name: : David
My Ride/Rides: : 2000 3.8L Stang, Performance Red
Mods: : Built 3.8l, Custom little 62mm Single Turbo, fox 8.8 rear, TKO500 5speed manual trans, HPX 05 maf, custom tune by myself, and vmp tuning Looking for 550rwh at the wheels! Its just a lil v6 Smile

View user profile http://www.myspace.com/kbcobra

Back to top Go down

Re: Is anyone interested?

Post by Danstang on Thu Mar 31, 2011 12:38 am

BraMas wrote:Very cool! but not my cup of tea. It would look awesome in the garage
Keep in mind this is coming from someone that refuses to put WH stickers on my car Smile
We're gonna tag those window when you're not lookin' this year! devilwave

_________________
avatar
Danstang
Admin

Male Number of posts : 3849
Age : 47
Humor : Forget 5 o'clock.....it's NOON somewhere!
My Name: : Dan
My Ride/Rides: : 2002 Mustang GT, Mineral Grey Metallic
Mods: : LRS CAI, Pro 5.0 shifter, Auburn HD differential, 3.73 gears, MAC O/R H-Pipe, CherryBomb cat-backs, '03 Cobra front bumper, '01 Cobra hood, Mach1 wheels (powdercoated), black wing, rear window louvers, Tokico lowering springs and struts, Ford Racing Cobra front control arms, UPR rear upper and lower control arms, Eibach rear sway bar, MAC caster/camber plates.


View user profile

Back to top Go down

Re: Is anyone interested?

Post by dago on Thu Mar 31, 2011 10:03 am

I like it but i like the one iv got better.I replaced my gt emblems with crome blackwidows but i have to leave my horse

_________________
avatar
dago
Moderator

Female Number of posts : 852
Age : 57
My Name: : GLENDA
My Ride/Rides: : 2006 GT YELLOW SHE IS CALLED BLACK WIDOW SHE HAS A TUNNER A COLD AIR INTAKE CATBACK X PIPES RUNS A 13.5 IN THE QUARTER two tone katskin leater with a blackwidow on the head rest yellow carbin dash kit.

View user profile

Back to top Go down

Re: Is anyone interested?

Post by BRADTHEBLADE on Thu Mar 31, 2011 4:51 pm

they look sweet but i just spent alot of time and money getting rid of all my emblems................................and locks and antenna and third brake light.....ect...ect.but i ramble.lol
avatar
BRADTHEBLADE
Small Block 302
Small Block 302

Male Number of posts : 380
Age : 43
My Name: : Brad
My Ride/Rides: : mine 95vert/wife 01 gt
Mods: : custom paint v6 to v8 swap auto to tko 500 swap 7.5 to cobra irs swap all locks and antenna shaved lowerd 2.5 inches red interior swaped to all black cobra interior powder coated engine parts svo side exhaust one piece NON halo head lights clear tail lights and side markers saleen speedster cover 10.5 chrome cobra r rims out back and 9,s up front 3.73 gears aluminum radiator and drive shaft 125 shot dual nitrous tank set up style bar with custom air defuzer and alot of other things i forget

View user profile

Back to top Go down

Re: Is anyone interested?

Post by BraMas on Thu Mar 31, 2011 9:05 pm

Danstang wrote:
BraMas wrote:Very cool! but not my cup of tea. It would look awesome in the garage
Keep in mind this is coming from someone that refuses to put WH stickers on my car Smile
We're gonna tag those window when you're not lookin' this year! devilwave
you can sleep with my wife but noone puts stickers on my car

_________________
Let me know if you want parts Powder Coated
avatar
BraMas
Admin

Male Number of posts : 1533
Age : 94
My Name: : Tim

View user profile

Back to top Go down

Re: Is anyone interested?

Post by Shady on Thu Mar 31, 2011 10:18 pm

BraMas wrote:
Danstang wrote:
BraMas wrote:Very cool! but not my cup of tea. It would look awesome in the garage
Keep in mind this is coming from someone that refuses to put WH stickers on my car Smile
We're gonna tag those window when you're not lookin' this year! devilwave
you can sleep with my wife but noone puts stickers on my car
we already "tagged" your wife but we wanted something that was more of a challenge and actually meant something to you...

_________________

Shady
Admin

Male Number of posts : 1366
Age : 33
Humor : When you own a ford you don't need a good wrench!
My Name: : Rick AKA "Shady"
My Ride/Rides: : 1997, Mustang GT, Black
Mods: : Lambo doors, 6" cowl hood, Alpine touchscreen in-dash DVD player, Nytrex Triple Threat Nitrous System, BBK off-road X pipe, Flowmaster exhaust, Halo Headlights, 20" KMC Floss Wheels, and a cute passenger seat cover...

View user profile

Back to top Go down

Re: Is anyone interested?

Post by scstanger on Thu Mar 31, 2011 10:36 pm

Ok this topic is getting waaaayyyyy off track now!

_________________
avatar
scstanger
Admin

Male Number of posts : 1175
Age : 38
Humor : In every situation!
My Name: : Richard
My Ride/Rides: : 2000 Roush Stage 1
Mods: : Roush CAI, BBK 70mm TB with Trickflow Aluminum Intake manifold and plenum, Magnaflow X and shorty mufflers, SCT Tune, 8000k HID Headlights and FOGS



View user profile

Back to top Go down

Re: Is anyone interested?

Post by dago on Thu Mar 31, 2011 11:22 pm

You think.

_________________
avatar
dago
Moderator

Female Number of posts : 852
Age : 57
My Name: : GLENDA
My Ride/Rides: : 2006 GT YELLOW SHE IS CALLED BLACK WIDOW SHE HAS A TUNNER A COLD AIR INTAKE CATBACK X PIPES RUNS A 13.5 IN THE QUARTER two tone katskin leater with a blackwidow on the head rest yellow carbin dash kit.

View user profile

Back to top Go down

Re: Is anyone interested?

Post by Danstang on Fri Apr 01, 2011 9:26 pm

BraMas wrote:
you can sleep with my wife but noone puts stickers on my car
smilelol
Shady wrote:
we already "tagged" your wife but we wanted something that was more of a challenge and actually meant something to you...
affraid hail
scstanger wrote:Ok this topic is getting waaaayyyyy off track now!

dago wrote:You think.

iagree

_________________
avatar
Danstang
Admin

Male Number of posts : 3849
Age : 47
Humor : Forget 5 o'clock.....it's NOON somewhere!
My Name: : Dan
My Ride/Rides: : 2002 Mustang GT, Mineral Grey Metallic
Mods: : LRS CAI, Pro 5.0 shifter, Auburn HD differential, 3.73 gears, MAC O/R H-Pipe, CherryBomb cat-backs, '03 Cobra front bumper, '01 Cobra hood, Mach1 wheels (powdercoated), black wing, rear window louvers, Tokico lowering springs and struts, Ford Racing Cobra front control arms, UPR rear upper and lower control arms, Eibach rear sway bar, MAC caster/camber plates.


View user profile

Back to top Go down

Re: Is anyone interested?

Post by FRCE_FED on Sat Apr 02, 2011 1:57 am

lol omgno

_________________



UNDER CONSTRUCTION
Built 3.8l/ lightly ported upper and lower/ stock heads/ modified MAC shorty headers/ 62mm single turbo/ little cam/ 60lb injectors/ twin GT pumps w- dual fpdm/ TKO500 trans/ HPX Slot MAF/ Street tires- 315/35/17 Nitto 555R's/ Fox 8.8 rear w- 3.73's. Looking for 550rwhp at 15-20psi
avatar
FRCE_FED
Admin

Male Number of posts : 2450
Age : 31
Humor : spendin money that I don't have to buy parts that I don't need to impress people that I don't know
My Name: : David
My Ride/Rides: : 2000 3.8L Stang, Performance Red
Mods: : Built 3.8l, Custom little 62mm Single Turbo, fox 8.8 rear, TKO500 5speed manual trans, HPX 05 maf, custom tune by myself, and vmp tuning Looking for 550rwh at the wheels! Its just a lil v6 Smile

View user profile http://www.myspace.com/kbcobra

Back to top Go down

Re: Is anyone interested?

Post by Sponsored content


Sponsored content


Back to top Go down

View previous topic View next topic Back to top

- Similar topics

 
Permissions in this forum:
You cannot reply to topics in this forum