NEED SOME PARTS FOR THE STANG
4 posters
Page 1 of 2
Page 1 of 2 • 1, 2
NEED SOME PARTS FOR THE STANG
I NEED A PLENUM, THROTTLE BODY, AND COLD AIR INTAKE. I KNOW I CAN GET ON EBAY, BUT WAS WONDERING IF ANYONE HAD ANY OF THESE PARTS OR KNEW ANYONE WHO DID LET ME KNOW.
Guest- Guest
Re: NEED SOME PARTS FOR THE STANG
what year of motor?
FRCE_FED- Admin
- Number of posts : 2450
Age : 37
Humor : spendin money that I don't have to buy parts that I don't need to impress people that I don't know
My Name: : David
My Ride/Rides: : 2000 3.8L Stang, Performance Red
Mods: : Built 3.8l, Custom little 62mm Single Turbo, fox 8.8 rear, TKO500 5speed manual trans, HPX 05 maf, custom tune by myself, and vmp tuning Looking for 550rwh at the wheels! Its just a lil v6
Re: NEED SOME PARTS FOR THE STANG
IT IS A 2002 GT 4.6. I JUST WANT UPRGRADE PERFORMANCE PARTS. NO STOCK PARTS. DONT REALLY HAVE A SET BUDGET. OPEN TO ANY SUGGESTIONS.
Guest- Guest
Re: NEED SOME PARTS FOR THE STANG
Do you have an Intake or anythign? your not going to see any significant gains from just a t/b and plenum unless you've got like a jlt intake. I know when i put my 75mm t/b and plenum on I couldn't feel it.
Guest- Guest
Re: NEED SOME PARTS FOR THE STANG
have you looked at vortech or procharger? An s trim or p1sc and some 4.10's would get that car moving.
stanglover2358- Small Block 302
- Number of posts : 342
Age : 38
Re: NEED SOME PARTS FOR THE STANG
I HAVE 4/10'S. I JUST WANTED TO GET SOME MORE POWER WITHOUT GOING TO THAT EXTENT.
Guest- Guest
Re: NEED SOME PARTS FOR THE STANG
well u can get a nice s trim or procharger kit for 2000...which in my opinion is the best bang for the buck..i mean sure you could a tb, pleneum, jlt intake, pullies and spend 600 bucks for what maybe 30rwhp.
stanglover2358- Small Block 302
- Number of posts : 342
Age : 38
Re: NEED SOME PARTS FOR THE STANG
well sounds like u got your mind set on what you want to do
stanglover2358- Small Block 302
- Number of posts : 342
Age : 38
Re: NEED SOME PARTS FOR THE STANG
I AM ASKING IF ANYONE KNOWS WHERE I CAN GET THOSE FOR CHEAP. AN INTAKE, T/B, PLENUM OR IF ANYONE HAS ANY THEY WANNA SELL? ALSO WHAT BRANDS SHOULD I GO WITH?
Guest- Guest
Re: NEED SOME PARTS FOR THE STANG
I'll keep my eyes open on the various boards that I visit for sale items.
AJ
AJ
Re: NEED SOME PARTS FOR THE STANG
I've seen a bunch of stuff up on corral.net
I got my proffesional product t/b and plenum for 200 bux from latemodelrestoration
If you want to feel a gain i'll let you know if the aluminum driveshaft is a seat of the pants difference...it's going on tonight if i can convince brittney into letting me have it ! haha. but the throttle body and plenum i felt no difference...actually, until the tune i think the 75mm made if have less tq down low
http://forums.corral.net/forums/showthread.php?t=1052858 theres on add...i'll keep looking thouh
I got my proffesional product t/b and plenum for 200 bux from latemodelrestoration
If you want to feel a gain i'll let you know if the aluminum driveshaft is a seat of the pants difference...it's going on tonight if i can convince brittney into letting me have it ! haha. but the throttle body and plenum i felt no difference...actually, until the tune i think the 75mm made if have less tq down low
http://forums.corral.net/forums/showthread.php?t=1052858 theres on add...i'll keep looking thouh
Guest- Guest
Re: NEED SOME PARTS FOR THE STANG
CLINTBGT02 wrote:I AM ASKING IF ANYONE KNOWS WHERE I CAN GET THOSE FOR CHEAP. AN INTAKE, T/B, PLENUM OR IF ANYONE HAS ANY THEY WANNA SELL? ALSO WHAT BRANDS SHOULD I GO WITH?
Do this and nothing else clint... BELIEVE ME OK...!!!!
75mm Accufab TB and Plenum paired with a JLT Cold or Ram air intake. You can get all those off americanmuscle.com
You can type a special coupon code that will get you 6% off as well... pm me for the code if you want to go through.
Guest- Guest
Re: NEED SOME PARTS FOR THE STANG
honestly if i had an auto the first thing id do is a stall convertor before anything else..if its a dd id get a 3000 stall if not then id get like a 3400/3500 stall
stanglover2358- Small Block 302
- Number of posts : 342
Age : 38
Re: NEED SOME PARTS FOR THE STANG
SteviGX wrote:I've seen a bunch of stuff up on corral.net
I got my proffesional product t/b and plenum for 200 bux from latemodelrestoration
If you want to feel a gain i'll let you know if the aluminum driveshaft is a seat of the pants difference...it's going on tonight if i can convince brittney into letting me have it ! haha. but the throttle body and plenum i felt no difference...actually, until the tune i think the 75mm made if have less tq down low
http://forums.corral.net/forums/showthread.php?t=1052858 theres on add...i'll keep looking thouh
pats right.. a 75mm tb on a relatively stock 4.6 useless.
stanglover2358- Small Block 302
- Number of posts : 342
Age : 38
Re: NEED SOME PARTS FOR THE STANG
Just go check the classifieds on different sites (modularfords, corral, mustangforums, etc). You can usually find some great deals on those sites. Throwing on a tb, plenum, and intake isn't really gonna be worth it unless you get a tune as well.
Guest- Guest
Re: NEED SOME PARTS FOR THE STANG
even with a tune its not worth it. If you had a blower car or ported heads/cam car then ya a tb and intake and plenum is all worth it. as said before your better off getting a stall and a driveshaft or a nos kit.
stanglover2358- Small Block 302
- Number of posts : 342
Age : 38
Re: NEED SOME PARTS FOR THE STANG
pm me for discounts on nx plate kits for 99-04 GT.
stanglover2358- Small Block 302
- Number of posts : 342
Age : 38
Re: NEED SOME PARTS FOR THE STANG
yes their made specifically for an auto
stanglover2358- Small Block 302
- Number of posts : 342
Age : 38
Re: NEED SOME PARTS FOR THE STANG
2k6silvergt wrote:Just go check the classifieds on different sites (modularfords, corral, mustangforums, etc). You can usually find some great deals on those sites. Throwing on a tb, plenum, and intake isn't really gonna be worth it unless you get a tune as well.
Even with a tune your prolly not going to notice much of a difference. If you want to feel it do some N20. it's the same price if you do accufab
Guest- Guest
Page 1 of 2 • 1, 2
Similar topics
» 'stang down again........
» New Top for the Stang!!!!!!!!!!!!
» my stang
» 67 stang for sale
» Are you a newb? If so, please introduce yourself.
» New Top for the Stang!!!!!!!!!!!!
» my stang
» 67 stang for sale
» Are you a newb? If so, please introduce yourself.
Page 1 of 2
Permissions in this forum:
You cannot reply to topics in this forum
|
|